MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Bugeye forward tilt hinges

About 8 years ago Mitch Preston was doing a run of forward tilt hinges. I was lucky enough to get on the list for a set. I recall that there were instructions and some, to be fabricated, components. You guessed it, I have misplaced the instructions. So, if Mitch is listening or anyone knows Mitch or anyone has a copy of his instructions, I would appreciate some help dredging up the installation instructions.
Brett Wright
BEW Brett Wright

Ok, maybe this photo will help. This is a very common hinge arrangement but I do not have the instructions or any of the discussion of spacers, locating new holes, bolt size etc. to make installation smooth. These components were cut on a CNC machine out of what appears to be aircraft aluminum. So if anyone could provide instructions, I would be most appreciative. After 8 years, I am ready to make it happen

BEW Brett Wright

Brett, this may help:
http://gerardsgarage.com/Garage/Tech/tilthinge/tilthingeWS.htm
GuyW

Guy,
I have seen what you sent and I suppose I could ask Gerard for his instructions but was feeling a bit cheesy about that since I procured this stuff elsewhere. What I really do need are the written installation instructions
BEW Brett Wright

Yes Brett, l realised it was written instructions you were after but as no-one else was responding l thought that at the least the photos might help.
And, yes, it's a bit cheeky asking Gerards Garage for a copy of the instruction, but what's the worst that can happen? !!
GuyW

See if this helps: http://www.ahsdc.org/Files/Tech_Information/Tech_Information_Bonnet_Hinge.pdf
Stan Kowznofski

Oops, try this: www.ahsdc.org/Files/Tech_Information/Tech_Information_Bonnet_Hinge.pdf
Stan Kowznofski

Stan,
Sorry for the delayed response. What you provided is exactly what I am looking for. Perfect....Thankyou
BEW Brett Wright

This thread was discussed between 04/06/2018 and 07/06/2018

MG Midget and Sprite Technical index

This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now