Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Competition Wiring loom
Hi, Looking for a new loom for my rally car anyone know of a good company who can make me one up or alter a standard one? |
Peter King |
http://www.autosparks.co.uk/bespoke (haven't used them personally) |
David Smith |
I had Autosparks make me a loom for the racer. I added some additional circuits and deleted some things which I didn't need. They also increased the length of some runs for me. |
Dave O'Neill 2 |
Peter, I used Autosparks to make the very non-standard loom for our 1380 Minor some years ago, and they were excellent. I am about to get them to recover the complete loom as part of the current strip down and respray, so hope they are still as good! Richard |
Richard Wale |
I am currently fitting a standard Autosparks loom to a frog. It's fine but if I had to comment I would note that a couple of the bullet ends (crimped) pulled off when I tried to remove them from a connector (and not a particularly tight connector to share the blame). I don't have a bullet crimping tool so I can't give them the once over myself but the ones which came off I have soldered. Otherwise cable colours/positions/lengths seem spot on. |
Graeme Williams |
Richard Will you be going to the restoration show at NEC in March? I will be on the Masc stand. If you are going do come and say hello. Remember me to Sally. Alan |
Alan Anstead |
This thread was discussed between 31/01/2016 and 02/02/2016
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now