Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Free Tools
Small collection of tools, including micrometers and thread gauges any use to anybody? Happy to post rather than bin. Colin ![]() |
C Martin |
Yes, I'll have them. Can you work out post cost to SY132LN? Rob |
MG Moneypit |
No problem Rob,I will box them up and weigh it and work out the cheapest post cost. I will add a few small taps and reamers as well. Colin |
C Martin |
That's very good of you Colin. I can't bare the thought of tools being thrown away. Rob |
MG Moneypit |
Rob, looks like £8,99 by 2nd class post. Email your address to martinz101 (at) hotmail.com and I will get it on its way. Colin |
C Martin |
Rob, I hated the thought of throwing them away too, but i have repurposed my tool makers cabinet and my wife didn't want these items in her new sewing/knitting/crossstitch box! Colin |
C Martin |
Colin-Rob Fantastic It's actions like this that restore my faith in all things good in the world Screw all the doom and gloom virus stuff A happy wife makes for a happy life Cheers willy |
William Revit |
Rob, please note that some of those G clamp things will not fully close and may have gaps of 1, 2 or 3". |
S G KEIL |
Colin, you should have mail. Steve, yes it depends on the range they are meant to measure. 1" to 2" etc. I remember from metalwork classes. Nearly 60 years ago now, where has the time gone??? Rob |
MG Moneypit |
Quick off the mark there, Rob! ;-) |
GuyW |
This thread was discussed between 13/12/2021 and 14/12/2021
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now