Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - PCV
I have been working on a US import today, (1971 1275) and am looking for a PCV valve and its supporting bracket and manifold take-off. All that is there now is a funny bodge of a take-off and a piece of hose plugged with a rusty wheel nut (and I assume something behind the wheel nut). Does anyone have one lying around - even including the inlet manifold? |
dominic clancy |
I put one up on ebay a few days ago; I can find the mounting bracket if you are interested in it. |
David Smith |
Hi Davd I'll take it (and the mounting bracket and if you have the manifold take-off as well.....) - do you want to let the auction run or close it off? Thanks Dominic |
dominic clancy |
will look in the morning... |
David Smith |
Dominic you have mail.... |
David Smith |
I have the complete assy(and manifold) going spare - and the reason its going spare is that although it worked fine my old 1966 1098 , when I fitted it to my current 1968 1275, it created the dreaded clouds of blue smoke! |
M J Chapman |
David has kindly pointed me back to the thread to see if I want to take up MJ on his offer. MJ could you please mail me.... Thanks Dominic |
dominic clancy |
This thread was discussed between 26/09/2015 and 28/09/2015
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now