MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Rampipe Improvements

Something has gone right!! Having decided to re-use the fifty year-old rampipes that came with the car, I had a good look at them, and saw that they narrowed nicely to a diameter of approx 1 1/8", but then opened out to the fixing plate hole of 1 1/2" (see the first picture). A tuning modification!

I hunted round the house and garage for a 1 1/8" cylinder of some kind, and found a plastic Typpex bottle. A short piece of hose stretched onto it, a nice film of vaseline, and the assembly was pushed down the ram until it stuck fast. Then JB Weld and wait fifteen hours. The Typpex bottle tapped out nicely, and all it needed was careful sanding.

Please forgive me for boasting. I don't often get the chance, especially when SWMBO is around.





Nick and Cherry Scoop

Nice one--you'll actually be able to feel the difference driving it i reckon.
William Revit

Very nice. So you'll not bother with filters?
Les Rose

No Les - I'll be using my nice cheap RamAir foams.
But before that - test-fitting the rampipes - I found that the new gaskets for my H1s have apertures an eighth too small. They really don't care, do they?

Nick and Cherry Scoop

You just can't trust anything nowadays---check check check-

William Revit

You're right on two counts, Willy. It all comes down to the people who care, i.e. ourselves, and the test drive was pretty nippy.

Nick and Cherry Scoop

The best thing you can say about those ram pipe gaskets is they've got a hole in them.
The diameter isn't even close is it?

Looking good in your engine bay Nick. A job well done.
Jeremy MkIII

Thanks Jeremy. Nearly there.
Is yours a RWA?
Nick and Cherry Scoop

Yes it is Nick. On a '96 Heritage shell.
Jeremy MkIII

I saw this at the Spridgetmeet Holland

Flip Brühl

So many questions, Flip.
Did you crop this down from a bigger shot? I'd love a wider view.
Nick and Cherry Scoop

Hello Nick
This is all I have. I do not know if the golf ball dimples work.

Flip




Flip Brühl

That intake looks very sexy Nick!
Tarquin

Tarquin! You still here? Good to hear from you.

They are quite sexy, aren't they? Probably not very efficient by today's standards, but at least not obstructive.
Nick and Cherry Scoop

One last piece of information: if you bought the aftermarket Coopers, which I did eight years ago, this is what you got.

Nick and Cherry Scoop

I have KN’s on all of my cars: both of the Sprites & my 1990 Escort XR3i has a KN filter in its original Ford filter box.
Alan Anstead

This thread was discussed between 19/09/2026 and 10/10/2026

MG Midget and Sprite Technical index

This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now