Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Rasping noise
Now that I've fitted the new exhaust, I've noted that here is a rasping noise as I decelerate through 2500 revs. On closer inspection I've realised that it is vibration transmitting through the heat shield. Any thoughts on what could be causing the engine to vibrate at these revs? |
Pete Ottewell |
Do you have the two support brackets fitted at the bottom corners of the heat shield? |
Dave O'Neill 2 |
Good point Dave I've never fitted them, but why has it developed now and what's the cause. |
Pete Ottewell |
I remember why I didn't fit them, they were NLA. I just found some on the tinternet at Leacy Classics, they want £18 for the pair with shipping. Quite a lot of money for a couple of bent bits of steel. |
Pete Ottewell |
Some women make that noise too. Try slowing down. lol. |
Lawrence Slater |
Pete I should be able to find a pair of those brackets for you, email mgsmithy A T yahoo dotcodotuk if wanted, |
David Smith |
Dave that's really kind, I'll will e-mail you |
Pete Ottewell |
Received with thanks Dave! |
Pete Ottewell |
Brackets fitted, noise gone, now onto the next rattle. Thanks again Dave. |
Pete Ottewell |
This thread was discussed between 24/05/2015 and 30/05/2015
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now