Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Welch plugs
Could some kind soul "out there" tell me the diameter of the welch plugs fitted to the blanked off end of the fulcrum pin end of the wishbone pan....many thanks...Dave |
David Cox |
If it’s this one - 17mm
![]() |
James Paul |
Thanks, James, that's the one... |
David Cox |
that's ok. I thought I had the old ones in my "to be thrown out one day" box. and I did |
James Paul |
Have you tried Ahead 4 Healeys? http://www.ahead4healeys.co.uk/BLANKING-PLUG---WISHBONE-PIN-id13414.aspx I needed welch plugs for my gearbox and they were the only Spridget parts place that had them. C |
C Mee |
I think it ought to be smaller as it fits in the small end of the trunnion boss not the larger end where the screw in grease point shown above goes. |
David Billington |
You're right David....l was forgetting about the thread on the greaser end.. The question is back out there, again....thanks |
David Cox |
For less than a quid I'd buy 2 from the link given earlier. |
David Smith |
Done just that today. Thanks all... |
David Cox |
This thread was discussed between 01/02/2023 and 02/02/2023
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now