Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MG Y Type - Bonnet hinge
Hello by chance does anyone have a spare set of bonnet hinges for a yt? Or know of a source for them Thanks Lucas |
Lw Wallace |
Hi Lucas, Can you be more specific as to what part you need ?. Perhaps post a photo of a car with the part circled that you need. regards Tony Slattery Black Mountain Australia |
A L SLATTERY |
Email me off line Lucas. Do you need a side one or top ... or all 3? Paul |
Paul Barrow |
Hello Tony The two brackets on either end of the rod for the bonnet Thanks lucas |
Lw Wallace |
Hi Lucas, My spare ones are a bit scrappy, but NTG in Ipswich UK (also trade as MGbits4U) sell new parts - The front one is part#C099B, and the Rear one is part#C099C. Good Luck Tony |
A L SLATTERY |
Hello Tony Thanks for the response I am mistaken I need everything to fasten the bonnet together where the hinge is involved not sure what all this entails the car was apart when I got it and these pieces are missing Much appreciated Lucas |
Lw Wallace |
Email me pictures of what you have Lucas and I will see what I can canniblize out of the hoods/bonnets I have. Paul |
Paul Barrow |
There is a brass rod that acts as the hinge pivot from front to rear. There is also a stainless steel dress piece, but this is not essential. The brass rod needs to be the same length as your bonnet. Hope this helps Tony |
A L SLATTERY |
This thread was discussed between 18/04/2018 and 21/04/2018
MG MG Y Type index
This thread is from the archives. Join the live MG MG Y Type BBS now