MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MG Y Type - Steering Wheel Springwasher


I am looking for a toothed spring washer (or whatever the correct name is) that secures the steering wheel nut to the steering column. Could not find one locally.

The diameter of the shaft reads 19mm (3/4").

cheers, Anton



Anton Piller

External (fine) tooth lock washer / serrated / shakeproof or you could get internal tooth.

M18 in metric but be aware some list as 18mm id rather than 19mm.
Nigel Atkins

Thank you Nigel

Any idea, where to get?

Anton
Anton Piller

Anton,
if you've got anywhere local to you that sells stuff to farmers they might have such fittings to perhaps sell loose rather than messing around ordering over the internet and/or post to find it's 18mm and not 19mm or 3/4" and/or having to buy in multiplies.
Nigel Atkins


Nigel

My search was successful. I got three external tooth lock washers with a Company that produces hydraulic hoses for trucks and heavy roadwork equipment.

Thank you for your support

Anton
Anton Piller

Anton

https://www.grainger.com/product/FABORY-Lock-Washer-54FN51?searchQuery=M37420.180.0001&searchBar=true

Is this what you are looking for?

Sadly only available in a pack of 25 ... but also only $12 plus shipping!

Paul
Paul Barrow

Anton,
sorry I missed your post - well done.

Just out of curiosity what did they call them and what was their size (if M18 were they 19mm i.d.)?

A small shop I used to go to is quite a rare type in these parts as it sold lots of nuts, bolts and fittings including hydraulic and you used to be able to buy as little as you needed, one washer if you had the cheek, and the chap would insist on giving you a hand written receipt every time. But they must have been taken over a while back as the chap was still there but gave printed till receipts only and the stock range had changed plus lower quality tools added.

Nigel Atkins

Hello Paul & Nigel

Thank you for your posts. Probably our comments crossed. I was able to get three of them over here in Switzerland. Asking price: "a donation for our coffee piggy bank".

In Swiss-German they are called "Faecherscheiben", which translates to something like Fan Disc. They are described as 18mm (to fit a 18mm bolt). But are I/D 19mm in reality.

Nigel's "external tooth lock washers" is a very precise name.

cheers
Anton
Anton Piller

This thread was discussed between 29/08/2021 and 19/09/2021

MG MG Y Type index

This thread is from the archives. Join the live MG MG Y Type BBS now