Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MG Y Type - Y type sway bar
Any help would be appreciated. Looking for original front sway bar so as not to modify A frames. Also right side rear door glass. For 53 YB. Thanks in advance, Ray ![]() |
RJ Vigeant |
Good luck with that Robert. There were only 1,301 YBs made and although a very few of the late YAs had anti-roll bars instead of Panhard Rods. I think you'd be ahead getting some dimensions and pictures from a YB owner and getting one made up from appropriately hardened steel brother. I do not have a YB so I cannot help you but hopefully someone else can. Good luck Paul |
Paul Barrow |
Paul, good tip. I've been asking around a bit over 20 years now so I'm familiar on the unavailability of the antisway. Not ready to give up yet but if someone has specifications maybe I could get one made. Thanks, Ray |
RJ Vigeant |
Hi Ray Sorry for calling you Robert earlier :)! Hope you hear from someone soon. I acquired an anti-sway bar in a pile of bits I got a while back - I have no idea where it came from but I would not b e surprised if a TD/TF one would fit. You might want to look at TD/TFs in your local club and see if they measure up? That might open up a source for you - scrap a TD/TF?? LOL Paul |
Paul Barrow |
TD/TFs didn't have Sway bars. Owners fit the smaller diameter (3/4") bar used on the MGA/MGB and sold by MG part suppliers. Stuart |
Stuart Duncan |
Hello Ray. I think this is what you are looking for. If you have other questions send me a note. Butch ![]() |
R Taras |
Hello Ray here is my solution for the anti roll bar. I used an MBG bar, shortened the vertical links and made the connection to the wishbone from flat steel which I bolted inside the spring pan -- see the photos. Walter ![]() |
Walter Prechsl |
Butch's thing looks good Ray. Can a YB owner verify appearance against their car? Paul |
Paul Barrow |
Hi Paul. That sway bar came off a YB. Butch |
R Taras |
There you go Ray - search is over! Fantastic! Butch can probably advise you on the correct bushes you'll need too! Paul |
Paul Barrow |
Hi Butch Can you email me with details of which YB it came from please? Thanks Paul |
Paul Barrow |
Butch, That's it ! Could take this off line and make a deal ?? Really appreciate that. Please email with details. Thanks for quick response. Everyone else taking interest to respond thanks also. Regards, Ray |
RJ Vigeant |
Ray Have you got sorted on your anti-sway bar? If not https://www.ebay.co.uk/123685141049? may work for you? I see the seller "may not sell to the United States" but worth asking and if the answer is still NO then let me know - we may be able to effect a work around with it being shipped to a UK address first through the IMGYTR network! Paul |
Paul Barrow |
This thread was discussed between 12/12/2018 and 11/03/2019
MG MG Y Type index
This thread is from the archives. Join the live MG MG Y Type BBS now