Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG ZR ZS ZT Technical - ZR exhaust manifold
Hi all, Does anyone know of a 4-2-1 exhaust manifold for a ZR 160 (or 200/25Vi)? I'm looking for one with long primaries. Here in Holland nobody seems to know about aftermarket manifolds, I hope anyone of you can point me in the/a right direction. Thanks, Arend |
Arend Groen |
Try http://janspeed.com. Sorry, don't know if it's a 4-2-1 for a ZR, but I have their MGF version and it's good. Cheers, Paul. |
Paul Nothard |
As Paul says, try Janspeed. I've tried a ZR with their 4-2-1 manifold fitted (which I drove for MG World) - and found the car to be very very good. There are two versions - one for the smaller capacity ZRs (1.4) and another for the 1.8 (larger bore). They were excellent value to IIRC - check out their website for more information. |
Rob Bell |
Thanks, Paul and Rob, I will take a look. Do you know if they sell to Holland? Arend |
Arend Groen |
Direct link to appropriate page: http://217.79.114.240:8080/SearchResults.asp?ModelID=82 Just had a look at the on-line shop - and curiously Holland is not mentioned as a destination country (although France, Germany, Belgium and the Scandinavian countries are). I have no idea if Janspeed has a deal with a Dutch importer or not Arend - perhaps the best thing to do is contact Janspeed directly about this. |
Rob Bell |
Thanks Rob, I'll contact them and we'll see what they can do. Cheers |
Arend Groen |
This thread was discussed between 10/01/2005 and 19/01/2005
MG ZR ZS ZT Technical index
This thread is from the archives. Join the live MG ZR ZS ZT Technical BBS now