MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - 'Bowman' hose clamps

I have a can full of the above clamps, 'Sure-Tite' stamped. I'm not familiar with them, anyone know if they are for the A's or are even British made ? Brad
BOW Brad

Brad I have seen these before but they are rare I think. I tried to do a Google search but nothing came up which means to me they are old but no details that I can find. Maybe there is someone that knows more details or can do a better search for you, I am limited, sorry. Are they stainless steel bands or formed wire? FOG
FOG Frank

Most of the hose clamps on the MGA were the simple wire type with a r/h slotted tightening screw (see type 1 in picture which is an original petrol filler hose clamp.)

Type 2 is a repro. of the original heater hose clamps.
Type 3 is also a repro. of the rocker box breather hose clamp and lastly no. 4 is a British 'Jubilee' type clip which, as far as I know, was never used on the MGA. Odd this because they were invented many years before the MGA came out: perhaps they were too pricey for BMC.

There is a fourth type of MGA hose clip on the 4" air intake hoses but I don't have a spare one to photograph.

I don't think Bowman clips, whatever they look like, are British...................Mike

m.j. moore

I found a Bowman Products Division 850 East 72nd Street Cleveland, OH 44103 of Associated Spring Corporation. They used to manufacture replacement parts for cars/trucks. Here's a link to a Bowman display rack for hose clamps:

http://www.worthpoint.com/worthopedia/bowman-hose-clamp-storage-advertising-220717655

Here's a link with some business info:

http://www.trademarkia.com/bowman-71521792.html

See no references to "Sure-Tite" however.
Nick Kopernik

Brad, I see that others have brought us up to speed on the Bowman clamps, interesting info & good to know. Once again this group come thru with flying colors. FOF
FOG Frank

Hi Mike
I am looking for some heater hose clip as your type 2 in your post. I have 2 original clips but they are very rusty. Can you tell me where these can be purchased and the part number if possible.
Thanks Brian
Brian Paddon

Brian, I bought mine three years ago from Todd Clarke. His number is F34a and I think this is the set of four. He does all the correct hose clips except for the 4" hose clips which are a bit non-original.

His catalogue is online now............... Mike
m.j. moore

This thread was discussed between 29/02/2016 and 14/03/2016

MG MGA index

This thread is from the archives. Join the live MG MGA BBS now