Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGA - coupe part needed (or not?)
| Plate R.14 of the Service Parts List shows a "washer-seating" used on the coupe door handle, on the inside of the door I think. My car does not have one of these, but it had been taken apart at some time by a PO during a poor restoration, and other parts are missing. Does the coupe door use these seating washers behind the door handle, and does anyone have a set they could part with (any condition)? Thanks, George |
| G Goeppner |
| Not sure which part you are speacking of.My coupe has the normal estucheon and spring on the inside door handle but I see no washer. As I do not have a parts book is there any chance of a picture. Gordon |
| Gordon Harrison |
| George, when I started to assemble the doors on my coupe I was also looking for this part (#25), it was not at one of the 4 doors I had and none of the suppliers had it or knew of it so I think it was never existent. What I did made was a thin black rubber gasket to put it under the handle placed outside the doorskin. Don't think that a seating washer - what ever this would be - is needed. Remember the door handle is the very first part for assembly. Have fun! Siggi |
| Siggi |
| Hi Siggi, thanks for your comment. I thought this might be another error in the Parts List, your experience seems to confirm that. Sorry Gordon, I'm not able to post a pic. From the illustration, the part has the shape of the door handle pad, with two holes for the screws that fix the handle to the door. I thought it might reinforce the door skin on the inside, reducing stress on the sheet metal when opening the door. |
| G Goeppner |
| George, My couple does not have these pieces either and I doubt very much that the PO removed them. I had the car since 72. To tell the truth, I never noticed them in the parts book. Cheers, Gerry |
| G T Foster |
| Now I understand what we are talking about. No my car does not have one, but what I did do was to install a thin rubber gasket between the door handle and the outer door skin. It is trimmed to fit ,is not easily visable and give a "cushion" between the door and the handle ....when used. Not absolutely sure if it was worth the effort to install it but ...what the heck,it couldn't hurt. Gordon |
| Gordon Harrison |
| You may want to check if Todd Clarke sells this part. You can reach him at (215) 348-0595 or ClarkeSpares@worldnet.att.net Safety Fast! Rick Gregg Elkhorn, NE |
| Rick Gregg |
This thread was discussed between 15/02/2008 and 20/02/2008
MG MGA index
This thread is from the archives. Join the live MG MGA BBS now