Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGA - Halda Tripmaster
I'm looking for a Halda Tripmaster housing, alloy metal type. A non-working complete/part complete assembly would also work, but cost is a factor (I know they can be expensive). Does anyone have something available? Thanks, George |
George G. |
You mean this? http://www.mgaguru.com/mgtech/competition/comp201.htm |
Steven Devine |
If you want to get it working you will need all the gears to achieve the correct calibration. |
dominic clancy |
Steven, yes, that's it. My goal is a "display piece" at this time, not a working rally tool. |
George G. |
George. Did you try ebay? |
Steven Devine |
Did try ebay. A few working ones, $1K + which is about right for a good one. |
George G. |
I have an unrestored Halda Twin Master cat# TWM1 s/n 3840 c/w instructions, two cables, 4 "T" fittings/drive gears # 124 & 141 X gears and an extra "Z"gear. This setup was removed from a Riley 1.5 rallye car in the 1960s and stored. The instruction sheets are dated Sept 1, 1964 & March 1964. It was not in the car during the summer of 64 but I do recall it in use during 1965 so I assume the purchase date was in 1965. By 67 the owner was a bush pilot flying in the far north & no longer competing. This post reminded me that I still had the Halda. The metal case is not perfect as it has a few spots where the coating is gone.I am willing to sell the entire rig and will entertain reasonable offers. I am located in western Canada, BC Cheers Morris |
M Wadds |
Morris, sounds like you have a more or less complete unit, which is probably worth more than my budget for this project, especially since it is a Twinmaster model. Contact me off line at goeppnerg@gmail.com, include your asking price if possible. Thanks, George |
George G. |
This thread was discussed between 05/10/2015 and 07/10/2015
MG MGA index
This thread is from the archives. Join the live MG MGA BBS now