Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGA - Heater box flap
| I am restoring two heater units, and it appears as if there were two types of fins used on the flap.One flap had 8 fins, the other 4 fins which were at an angle to each other...it is this one that I am trying to fix, as they were bent. On the end of each fin is a small tab..is this meant to be bent, or is it straight? If anyone can supply some photos I would be grateful. Thanks. |
| Gary Lock |
| Gary Do these photos of my flap help? I am not sure what tab you are referring to. Steve
|
| Steve Gyles |
| Steve, you need to be careful posting photos of your flap |
| g c pugh |
| Steve, I agree with Gordon, please maintain a sense of decorum, this is NOT one of 'those' sites. Barry |
| BM Gannon |
| Steve, Perhaps we could meet? |
| James Johanski |
| Well I'll show you my 8 finned flap if....... The little tabs on the tips of the 4 flaps are to keep the door from opening too far.
|
| R J Brown |
| No idea what you are all talking about..... For the sake of decency I have slightly blurred the attached close-up photo of one of my flaps. The tab is visible and, as RJ says, acts as stop against the lip (also shown in photo!). Over to you Gordon. Steve
|
| Steve Gyles |
| Hi Steve, you and the rest of the MGA world will be pleased to know that for once I am lost for words lol gordon |
| g c pugh |
This thread was discussed between 24/01/2008 and 26/01/2008
MG MGA index
This thread is from the archives. Join the live MG MGA BBS now