Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGA - Holly 1904 carb.
H I Judson guys, When I purchased the Judson I rebuilt the carb but never upgraded the needle valve. My 1600 is bored .040 over what needle would give me the best performance? Thanks, Ken |
L Caya |
Check either with Dominic Clancy or George Folchi. I'm sure either of them will know for sure. |
Mike Parker |
There is no needle. Just a fixed jet (that's the problem with this carb). Probably around a 60 or 61 would suit you. My 1622 060 over is on a 62, so you need to be a little leaner. Have a look at the thread "one for the Judson crowd" for my current project to change to an SU HIF44 |
dominic clancy |
Thanks Dominic. I have been following your lateset project, good luck with it, it would solve several issues. Ken |
L Caya |
Dominic, Where can I buy these jets? Ken |
L Caya |
Ken, you can find them at a number of places inclucing jegs, summit racing, or directly from holley. They can be had individually or in kits with an assortment of sizes - see http://www.jegs.com/i/JEGS-Performance-Products/555/15023/10002/-1?parentProductId=758631 for example. |
Andy Bounsall |
Or even on Amazon |
dominic clancy |
Thanks Andy and Dominic Ken |
L Caya |
This thread was discussed between 21/01/2012 and 29/01/2012
MG MGA index
This thread is from the archives. Join the live MG MGA BBS now