MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Rear fender captive nut picture please

I would really appreciate if someone would post a picture of the captive nut area of the rear fender - i.e., at the back of the wheel arch is a captive nut welded to the inside of the fender wheel arch, and the one on my car was cut off. Id like to try and recreate it, but cannot find a picture.

Many thanks.

Tom
Tom Going

Do you mean the one for attaching the bottom of the rear splash guard? If it is this one I've attached a picture of the ones you can get from Todd Clarke. They're so cheap it's not worth making them...............Mike

m.j. moore

That is it exactly. Thanks! Ill do as you suggest.

Thanks again.
Tom Going

i just bent a piece of metal and drilled a hole in it, then used a nut/lockwasher.washer - worked just fine.

JIM in NH
AJ Mail

Here is a (poor) picture of the originals. Quite different in detail from Todds replacement, quite simple to make if you felt so inclined.

A M Leyva

A little brighter, if you like.

Barney Gaylord

Thanks!
A M Leyva

Here is a drawing with some additional information
SteveB


S L Bryant

Thanks so much. All the help is great. Got the captive nut parts from Clarke's Spares, and they are very nice. Thanks to all.
Tom Going

This thread was discussed between 02/04/2012 and 06/04/2012

MG MGA index

This thread is from the archives. Join the live MG MGA BBS now