MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - 67 Engine Rebuild

The rebuild of my 67 BGT will include the engine. I have read several times that a later head is "better". I am looking for reliability and will use this GT as a fun s 3 season driver. Can you share your experience? What should I make certain gets done during this rebuild. Head Cam? Timing gears ? Hardened valves? What little things have you done to have a solid rebuild? Thanks.
Ralph

Hi, and welcome Ralph.

The answer to your question will have a lot to do with what you want out of the engine. If you want just a nice MG to drive, nothing wrong with staying with stock.

From there up, there are a lot of modifications that can be done to increase power.

Mild road cam is one.

There is also the option of building stock and just adding a supercharger. You need to look at the cost of the added speed parts and determine which is a better value for what you want.

Nice thing about the SC is you can take it off and have a fully stock car.
BEC Cunha

Ralph,
Can you take a few days off in early February (7th-8th)?

John Twist (University Motors, Ada, Michigan) offers a series of technical seminars every FEB on (taking care of) our little cars. First title on this year's list is "MGB Engine Rebuild." You might want to attend and direct your questions to one of the best - I am.
Steve Buchina

Ralph,

just changing to an other (non modified) head does not help to increase power, even though some of thease heads were fitted with slightly larger valves (due to othr reasons).

If you considre a stage tuning of your engine, it might be a good idea to take one fo these heads with larger valves and have it gas flowed and cleaned out, recut seats and valves (three angles), but this is only one part of the job.

Balancing, pistons, dizzy, carbs, cam and camgear will also need to be considered when building and blueprinting a MG B engine for 120+ Bhp.

So what are you after?

Ralph
Ralph

Ralph,

Here are some web sites you can peruse regarding heads and modifications:

http://www.mgbmga.com Look at the tech articles, specifically MGB 25 with regards to different heads.

http://www.flowspeed.com Again, Sean has put together a very good article on the different heads used on the B.

http://www.peter-burgess.com The guy who literally "wrote the book" on MGB engine modifications. His "How to Powertune MGB 4 cylinder Engines" is a must-read. It is available from all the major parts suppliers or from Amazon.com. I have a Burgess Econotune head on my GT, and I absolutely love it.

The head by itself is just part of the equation. Everything must be taken as a system, and the weakest parts of the system upgraded first. I used ARP fasteners, had all the rotating parts lightened and balanced, use K & N filters, and installed a TR7 clutch disc, just as an example. Along with that, I have Greenstuff pads on the front with V8 bushings, and poly bushes on the rear for improved handling and stopping.

What I have now is an engine that is very tractable/streetable, revs freely, and puts a grin on my face every time I drive the car.

Do your research, and take the time to do things right. You'll be rewarded handsomely for the trouble you take now.



Paul K

Ralph-
The first order of business is to find a machine shop that is equipped to do the work properly. Nowadays few shops have ever seen an MGB engine, much less understand the dos and don'ts. The Chicagoland MG Club can point you in the right direction on that matter.
I've written an article that will help you in deciding just what you want to do. Post your Email address and I'll send you a copy.
Steve S.

This thread was discussed between 21/01/2007 and 22/01/2007

MG MGB Technical index

This thread is from the archives. Join the live MG MGB Technical BBS now