Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - Best Antiseize Compound?
| When I pull my upper shock links apart in a few weeks, I want to get some really good anti-seize/anti-corrosion onto the link bolt. There are so many sprays, and greases, both natural and synthetic - so what do you use/recommend when it 'really ahs to last'? Copper grease? Lanolin grease? Fish oils? Let the discussion begin! |
| Curtis Walker |
| I use a cheap brand (Comma) copper grease. It's change for a 1 litre tin which lasts for years. The brand name one is Copperslip but you would have to check the market there. Whenever I revisit something I took apart before it is never a problem to undo the bolts. |
| Stan Best |
| Coppa slip is fine for steel, but don't use it on aluminium. There are compounds of nickel and Aluminium available as well. NB I don't think replacement stainless bolts are a good idea. The stainless causes more corrosion in the hole, so they still seize in place unless you really coat them with anti-seize. (Also some "stainless" bolts are not as strong as the tensile steel variety. |
| Martin Layton |
| Copper grease. Or if adjacent to rubber then Waxoyl. |
| Paul Hunt 2 |
| Actually it is called Copaslip! I prefer the Loctite Marine Grade anti seize - it is designed for harsh environments where the items are exposed to fresh or salt water. |
| Chris at Octarine Services |
| I've been through the mill trying just about all of them, and I have to agree with Chris. I now use Loctite Marine Grade antisieze compound and it hasn't failed me yet! It costs a bit more, but quality always does. |
| Steve S. |
| Dow Corning High Vacuum Grease Catalog Description (VWR Scientific): "Ideal for sealing and lubricating vacuum and pressure systems. This silicone product has a low volatility to hold deep vacuums; it resists oxidation, is nonmelting and nongumming and has good thermal stability. Grease is translucent white with a heavy consistency. Temperature range: -40 to 400 degrees F (-40 to 204 degrees C)." List price is about: $ 16 per 5.3oz (150 g) tube. $370 per 8.0lb (3.6 Kg) can. ------------------------------------------------------ Gaskets, bolts, nuts, screws, manifold (intake and exhaust) studs, splined hubs, seals, engine and transmission mounts (smear rubber), ... etc. I've been using this stuff for nearly 40 years and really haven't found anything better. Water won't touch it, but it's easily removed with mineral spirits. Just a little dab will do you. |
| Steve Buchina |
This thread was discussed between 21/01/2007 and 23/01/2007
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now