MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Can I pre-fill my transmission?

I am putting the engine/transmission back in my B this weekend. I was wondering if I could get away with putting at some of the oil in the transmission while it's out of the car and easier to get to the side plug?

It seems like it would stay in there...

Thanks! David
David Steverson

David. I can't say whether that is a good idea or not, but as the gear stick assy is not fitted to the g/box on installation (I remove the turret held on by the 4 bolts) you can easily fill it through the big hole. That's the way I do it. Quick and easy.

Cheers

Tony
Tony Oliver

I would imagine that oil could leak out of the breather fitting
when you tilt the engine-transmission assembly to get it
in place.
Daniel Wong

No problem, as long as you have the remote fitted you can fill it before fitting to the car.
Garth
Garth Bagnall

Thank you all. Everything is installed on the transmission (it's an overdrive), so I'll give it a go and hopefully it will work, or else I'll have a version of the Exxon Valdez on my garage floor!
David Steverson

It worked! I put about 5 pints in, nothing came out during installation. So, now just a top off if needed and that's it. Much easier, that.

I also (this time) attached my speedometer cable, overdrive and reverse light wiring when the unit was suspended in the engine bay.
~David
David Steverson

This thread was discussed between 29/08/2009 and 30/08/2009

MG MGB Technical index

This thread is from the archives. Join the live MG MGB Technical BBS now