Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - Clutch ID
| How can I identify a Borg & Beck Heavy duty competition pressure plate and clutch disc versus a standard one? My pressure plate(in new condition) shows "Borg & Beck England Model 8-8 1/2". The Clutch disk shows "ASCO Japan" Thanks, Henri |
| Henri Van Groningen |
| I'm certainly no expert, but I believe that the major difference between a standard clutch assembly and a heavy duty one would be 1. diameter, 2. spring pressure in pressure plate and counter weights, and 3. friction material on clutch disc. Other than diameter I don't know of any other method of identifying a competition clutch. |
| Bill Young |
| Henri - I was never able to tell the difference between the standard and heavy duty clutch by visual inspection (probably because I didn't know what I waslooking for). The place I could tell the difference was the pedal effort was much greater with the heavy duty clutch (The heavy portion of the description is literal). the other difference was the very short life of the throw out bearing when using the heavy duty clutches. Since going back to the standard clutch, I have not worn out a throw out bearing at all and have not seen any difference in performance (of course I am not racing the car, which may make a difference). My use of the clutch has been the same with both types of clutches - push the clutch in, shiftto neutral and et the clutch out whenstopping for any length of time. Cheers - Dave |
| David DuBois |
| Quoting (from the Archives) someone who should know:- "...I have used the tr-7 4sp. clutch disc for 23-24 years, it is a 8.5" disc were the B is 8" & the 8.5" disc fills the pressure plate." |
| Derek Nicholson |
| Henri, there are special items of the clutch assy for competition work listed in the MG B parts catalogue. Copetition Parts / Stock Series 1. Lightened Fly AHT 4642 / na 2. Drive Plate BHA 4519 / GCP 116 3. Cover Assy BHA 4642 / GCC 118 4. Trust Bearing GRB 106 / GRB 106 5. Retaining Spring for Tr 22B 66 / 22B 66 No. 4 and 5 are identical, No. 2 and 3 are MG B special parts from the Abington Special Tuning Dep. ( BHA 4519 and BHA 4642) while GCP 116 and GCC 118 were the spares to replace the factory fitted OEM parts. I do not know the exact diffrence but i think that the liner material was of a softer formulation and the drive plate should have had a stronger diaphragm. May be the part numbers can help you to sort this out. Ralph |
| Ralph |
| Thanks all, it looks like I will have to invest in a new standard pressure plate and disk. Henri |
| Henri Van Groningen |
This thread was discussed between 16/01/2007 and 17/01/2007
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now