Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - cyl. head porting
Does any one have the bench air flow test results for a OEM head, vs a Laystall head,both off the bench and reworked? |
Len Fanelli |
Oops, "Off the shelf", and reworked. |
Len Fanelli |
I don't have any info on Laystall heads, but there is some flow information on my site. www.flowspeed.com |
Sean Brown |
Thank you Sean, I have been there, and taken your very good advise. |
Len Fanelli |
Hi len What do you mean by Laystall, I only know of the Laystall Lucas T-type ally head.Do you mean the HRG Derrington MGB head? Peter |
peter burgess |
Oops, I shuold have stated Laystall on a T type,; HRG Derrington, MSX, PMI on a B, VS OEM; both ported & off the shelf. |
Len Fanelli |
Hi Len How would figures help you? Do you mean remanufactured Laystall heads or originals? Peter |
peter burgess |
This thread was discussed between 14/01/2009 and 25/01/2009
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now