MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Girling servo

Hi

Døes anyone her know which thread is used for the 3 anchorbolts on the Girling MKIIa servo?

Thanks in advance
Torben
Torben Olesen

UNF, cannot remember if they are 3/8 or 5/16.
Colin Parkinson

Servo to bracket or bracket to bulkhead?
5/16" UNF would be my memory of them.
Allan Reeling

Three would be for servo to bracket - 5/16" UNF, only two from rear bracket to body 1/4" UNF.
paulh4

Checked out an old servo, the 3 mounting bolts are 3/8 UNF.

Colin
Colin Parkinson

Fair enough, the sizes I got were from the Parts Catalogue part numbers.
paulh4

Hi all
Thank You so much for your feedback. In Denmark we don't use inch thread that much (except in English cars), so your help is much appreciated.

rgds
Torben
Torben Olesen

This thread was discussed between 29/05/2021 and 02/06/2021

MG MGB Technical index

This thread is from the archives. Join the live MG MGB Technical BBS now