MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Horn Wires in Harness

I'm finally geting around to installing the new headlight harness in the '63 B. It has the purple and purple/black wires that connected the two horns together on dual-horn cars. My car only has one horn, so I don't need the purple & purple/black wires at all.

Does anybody out there know if the factory used the dual-horn harness on all cars, or was there separate harness for cars with single horns?

Thanks,
Greg
Greg Van Hook

Greg
The horn wires are in the loom only for one horn(purple and black/purple).
To fit two horns high and low it has a seperate loom to connect them together as it was always an extra for the second horn.

Ste

Ste Brown

Sorry, I wasn't very clear. This is just the harness that runs between the headlights, parking lights, and turn signals under the slam panel.

Thanks,
Greg
Greg Van Hook

Greg - The car originally come with 2 horns and the purple and purple/black wires should be in the sub harness going across the slam panel (of course, they don't need to be hooked up if you only have one horn. Cheers - Dave
David DuBois

Hi Dave,

From reading various wiring diagrams, I was under the impression that the second horn was optional. I guess I need to get a horn!

Cheers,
Greg
Greg Van Hook

....and my single horn, doesn't have the double-blade connectors to jump the wire to the other horn...

Greg
Greg Van Hook

Ste,

Thanks for the picture. What are those two fat plastic tube-looking things running along side the harness?

Greg
Greg Van Hook

Greg

As you have read the second horn was optional only.

As your horn has only one set of spades onit look in the bellmouth of your horn.

It will either have a L for low tone or H for high tone.

The other horn to the one you have will have the two sets of spades to split of off.

The fat tubing is covering that i slide over my wires from the headlights and side lights to neaten it up.

Ste
Ste Brown

Ste,

I'm trying to figure out how the harness is suspended beneath the slam panel. I can see from your photo that it's suspended near the right horn by a clip bolted to the panel at about the fifth (from right) vertical grill bar. I'm guessing there is at least one more clip suspending the harness - on the left side?

Would you mind posting another photo from the outside front showing where/how the clips are attached? Or could you please describe where the clips are located and the hardware that's used to mount the clips to the body (phillips or pozi screw with nut, or whatever)?

Thanks a lot,
Greg
Greg Van Hook

Greg

this is from the inside.

Use P clips then bend up out off way covering nut.


Ste

Ste Brown

This is from the outside.

Ste

Ste Brown

Ste,

Thanks so much. Perfect end to a great day. Just got back from seeing "Lion King" on Broadway for my 16-year-old son's birthday. He's deaf and they had an interpreted show. Even the traffic wasn't bad - we were through the Lincoln Tunnel within 10 minutes of picking up the car. Awesome. Anyway, your pictures are perfect, and you car looks topnotch.

Cheers,
Greg
Greg Van Hook

This thread was discussed between 04/06/2009 and 07/06/2009

MG MGB Technical index

This thread is from the archives. Join the live MG MGB Technical BBS now