Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - How do I adjust the rear drums after new shoes?
I have fitted the new shoes but how do I adjust the rear drum adjuster screw on the back of the drum? regards Mark |
Mark Mathiesen |
Turning the square adjuster, at the top of the backing plate clockwise, will reduce the clearance between the shoes and drum assembly. Tighten it until you can't rotate the drum by hand and then back it off until the shoes just drag on the drum. RAY |
rjm RAY |
Having fitted new shoes, you'll need to back off the adjuster in order to refit the drums, if you haven't already. |
Dave O'Neill2 |
Hi, Cobble together this tool, using a 1/4" drive socket and suitable Allen key. No more rounded corners on the adjuster. Herb |
Herb Adler |
Now I'll attach that photo, senior's moment. Herb ![]() |
Herb Adler |
Neat! |
Dave O'Neill2 |
This thread was discussed between 23/09/2012 and 24/09/2012
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now