MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - lenght pushros slave cylinder

Do anyone have the correct lenght for the pushrod from the slave cylinder please?

Kind regards

Pol
Meersman Paul

Pol. Exactly what dimensions do you need? Just the overall length from one end of the pushrod to the other end? Or, do you need dimensions from the end to the hole? I will be in a position to measure later this evening and can post any measurements you might need if someone else has not done so by then.

Les
Les Bengtson

Hi Overall length is 68mm Jim
jim soutar

Les

I need the dimensions from the end to the center hole.

Kind regards

pol
pol

pol the dimension you require is 62mm Jim
jim soutar

thx Jim for the information and in mm...

Kind regards

Pol
pol

This thread was discussed between 20/01/2008 and 23/01/2008

MG MGB Technical index

This thread is from the archives. Join the live MG MGB Technical BBS now