Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - Rear Disc Brakes
Anyone done a rear disc brake conversion? Colin |
Colin Parkinson |
Prather racing and Fab-Tek. Fast-MG should be the site. |
ASH Andrew |
You get them as part of the package if you fit Hoyle IRS as I have done. He uses Sierra or Granada rear discs. See picture.![]() |
Mike Howlett |
I have them on my ZA-Magnette which uses an almost identical (wider) banjo axle to the early MGB. Twin-Cam rotors and caliper brackets with custom made adaptors to fit MGF Calipers. Twin-Cam hubs...which isn't too practical if you want to use anything but Twin-Cam wheels. ![]() |
Rich McKIe |
Hi, I'm french, sorry for my vocabulary. I built my own rear brake disc system, new bearing retainer with brackets for caliper, two pots alloy caliper (citroën), machined mgb rotor (brembo) custom alloy bell, Ford wheel studs for Compomotive wheels. (hydraulic handbrake) Best regards michel ![]() |
dujuvejd |
Michel, Nice work. And don't apologise for your English, it is better than some native English speakers !! |
Mike Howlett |
This thread was discussed between 17/02/2010 and 20/02/2010
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now