Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - Sebring front
| Trying to find a Company that can supply a good Sebring front end IN AMERICA for my 1972 MGB. I've tried to contact Honeybourne, in the UK, by e mail with no success so i thought i'd see what is available here. I had seen a previous thread about some Sebring front ends that were too wide! Please help |
| G.L Lodge |
| G, I've been in touch with Honeybourne recently by email and found them to be helpful and replying pretty quickly. They even photographed the part I was interested in and sent me that as well. Might be worth another try? Have heard good reports about them and their prices seem ok. Clark. |
| Clark |
| http://www.morspeedperformance.com/ R. |
| Rick Stevens |
| Also, check with Gordon at the B-Hive: http://www.thebhive.com/ I got mine (air dam only - no CB bumper mods) from MGOC, but shipping was a bit higher than I'd have liked. R. |
| Rick Stevens |
| Thanks Clark. I just get nervous putting my faith in a company, especially overseas when i don't hear back from them. So maybe i'll give them another try. I'm also concerned with shipping, was it a wooden box?, also did the front fit easily?,thick glassfibre ? Thanks for your help. |
| G.L Lodge |
| They are a long established company and I'm just about to place an order myself. I am a bit closer than you, though! |
| Clark |
| Thanks everybody, but i'm still only seeing the Sebring front ends from English suppliers and the shipping cost is roughly 3 times the cost of the part. $200 saved in shipping costs can buy a lot of other parts. |
| G.L Lodge |
This thread was discussed between 23/01/2007 and 29/01/2007
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now