Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - steel dash crack paint
Hi Does anybody where i can get the steel dash cracking paint from in europe?? iam refurbishing my red B while at the paint shop would like to paint the dash.. |
a rodrigues |
Ebay? http://www.ebay.co.uk/itm/Wrinkle-Finish-Black-Spray-Paint-Hycote-400ml-Aerosol-/230598047854 |
Dave O'Neill 2 |
A better bet might be powder coating. They do a wrinkle look that is near indistinguishable from paint and it holds up a lot better. |
Bruce Cunha |
Thank you, the best bet will be the powder coating i will ask a near by fellow that does it. |
a rodrigues |
I second powder coating! |
John Minchin |
i got it out ready to ask around for power coating..
![]() |
a rodrigues |
One point. I recommend covering the inside of the glove box door hinge. Mine was a bit thick and the door had a wider gap. |
Bruce Cunha |
Hi Rodrigues I specialize in rewrinkling dashs to concourse standered they are powder coated £59 exchange.My email address is Richard.woolley@hotmail.com |
rj woolley |
Hi Moss sell this Hycote paint http://www.moss-europe.co.uk/Shop/ViewProducts.aspx?PlateIndexID=14085 I have used this twice to re-con my dash. It is good but you need to have the dash warm before you spray and have a heat gun ready after you spray. Follow the instructions and you will get a good result. Here my latest result http://www.richardthompson.co.uk/mg/rebuild/mywork/p1070165.htm Hope this helps. Richard |
Richard Thompson |
This thread was discussed between 13/10/2014 and 26/10/2014
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now