MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - 10 Months old and HGF

VVC its 10 months old and the HG just blow .. only done 10K, coming home from work with loads of smoke bellowed from the rear. Got the AA to dump it back at the dealers .. they told me it never had the upgraded HG but had the steel dowels ???? really upset as the dealers told me the new 2000 models had this problem sorted, my old VVC blow 2 ...
Sounds strange to me ??? answers anyone ???
R10 DPD
David

No real answers - I expected the newer models to have the uprated HG - but apparantly not?

Anyway - I suppose you should wipe your brow and thank the heavens you have a warranty to cover this!

This could just be a one off and youve been the unlucky one - however I still believe this is an inherent problem in the design of the F including the new TF regarding the cooling set up - only time will tell!
tony


Hi David,
sorry to hear about the HGF but of course a relief that You have a solid warranty !
On a more technical wiew this is confusing on a high level ... My impression was that the steel-dowels was a part of a "kit" including the uprated gasket. Would indeed be very interesting to know how this "new" gasket differs from the old one apart from the cut for better oil-reurn. As outside temperatures now are rising more and more "F"īs get their heaters turned off and the helpful extra path for water circulation gets shut down....

Regards , Carl.
Carl

I don't think the change was made from the new Y2K model, but later - it fact it was about one year ago, I think (others will confirm or deny!). So you may be one of the last with the old HG.

This is of considerable importance to me as I too have an early 2001 VVC, now up to 14K!

I have to say that 10K seems a bit early anyway.

Comments anyone else?
David Bainbridge

DB, confirmed it was about a year ago. The new parts were available across the counter from about May IIRC but I've never seen a definitive date or VIN for when they were adopted on the production line...
David

David, let us know what kind of locating dowels the mechanic finds when the takes your head off.

Jon

O.k. trawled the following from the archives. It's from a thread where I asked if anyone knew the VIN number of introduction of the uprated HG:

----------------------------

Posted 20 January 2002 at 23:05:52 UK time
Roger Parker, Tamworth, roger.parker@virgin.net
Interesting to note all 1.6 have the altered gasket. (Two silicon tracks removed and the steel dowels instead of the plastic.) Also see that from car YD 527784 in 1.8i the change is listed, but the VVC doesn't confirm the change and this is with the August 2001 parts slides. This doesn't mean to say the VVC has not been done, but that there is no confirmation.

Rog
----------------------------
Dieter Koennecke, Dormagen + Hersfeld, dkoen@gmx.de
David,

I'm sorry for having missed the question. Almost much engaged on the job.
Rog mentioned the spares file contents already earlier with the silly confusion due to the VVCs. But MGR placed as well some other information in May 2001.

(app. production build date March 2001).
Engine number 413284 (system 1) Engine number 667323 (system 2)

Approximate VIN introductions:
MGF RD 527784 R25 RF 585534 R45 RT 543110 R75 RJ 208514

The original cylinder head / gasket to block alignment method used 2 nylon hollow dowels one either end of cylinder head. The 2 nylon dowels have since been replaced with steel dowels to improve alignment. This along with associated head gasket modifications to improve sealing and oil drain back have reduced the possibility of such faitures occurring. All engines from the introduction numbers above have the latest head gaskets and dowels fitted.

Take this to your files.
VIN survey always awaiting input :)
http://www.mgfcar.de/vin/

Dieter





David Bainbridge

Really sorry to hear about this problem David. This is not a problem that should have occurred.

FWIW, just because the car was sold 10 months ago, it does not mean that it was manufactured 10 months ago. Cross-check your VIN and engine numbers against the data that David B re-posted above.
Rob Bell

Yeah - I got mine in April 2001, but I think it was made Dec 2000 - big delays shipping it over to Holland from where I imported it (strange eh?). So its one of the last without the uprated HG - bollocks!
David Bainbridge

David I seem to remember you saying that when you got your car you saved a pile of dosh and from what I remember it would cover about six HGFs:-)

Ted
Ted Newman

Thanks for the advise everyone .. didnt think it could be a 2000 car .. how naive of me ..LOL ..

Will check the VIN number as suggested and let u know.

One other point I forgot to mention, was some kind of sealant they use to stick it all together (thats my tech talk)the dealer mentioned they used the upgraded version which wasnt previously used. ??? not sure this really makes all that much difference.

Again Thanks .. R10 DPD

David

>>>>David I seem to remember you saying that when you got your car you saved a pile of dosh and from what I remember it would cover about six HGFs:-)

Bloody hell - you stalking me?!?!

Indeed I did. However, I would rather that it covered two thirds of the cost of a ZS120!
David Bainbridge

David,

What makes you think it was built in Dec 2000?
Mine has a Vin of 525992.
Is yours early or later than that?

Andy
Andy

Hi, Andy,

Mine is 524903. I seem to remember the Dutch dealers contacting me in the new year 2001 to tell me that they had heard that the car had been built, but that MG-R were waiting for a cheap shipping slot. I'm pretty sure it was January, but the IT *****'s here managed to delete my e-mail inbox for that period so I cannot unequivocally state that!

david
David Bainbridge

David,

So mines 1000 later than yours but still 2000 before the mod point.

I wonder how many cars they make a day, not that it matters. I didn't hear a thing until the car was at the dealers.

Talking of IT *****ers. This one's currently delivering a training course :-) Students are doing an exercise which is why I have time to chat.
Andy

This thread was discussed between 11/03/2002 and 13/03/2002

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now