Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - are VVC and MPi exhausts the same?
| i have seen a mgf exhaust for sale, but it does not state if its a VVC or MPI are they the same from CAT back??? |
| richb |
| I replaced the standard exhaust on my 1998 VVC with a Remus sports-exhaust which is registered for an MPi. No problem at all. However I heard that there is a second lambda-sond in the newer (Y2000 or trophy only ?) models which makes it impossible fitting an exhaust from an older model. Maybe someone else on this board knows more about the latter issue or check the archive. |
| Beat Fischer |
| They are exactly the same rich. Beat makes a good point; the exhausts currently on the market are not suitable for MGFs manufactured after the start of 2001 because of the absence of an additional sensor after the cat. Not insurmountable, but a pain to sort out. |
| Rob Bell |
| cheers chaps !!! |
| richb |
| There's an article and workshop manual extract in the new MGF FAQ showing the differences between the exhaust system as fitted to pre and post 2000(ish) model F's. In addition to the sensor the two systems also differ in how/where they attach to the cat. pre-2000 models connect if you like parallel to the cat, 2000-on connect at a right angle. HTH. |
| Paul Lathwell |
| Interesting to note that many aftermarket system manufacturers have a commonised build design to a point where the 2001 on flange would be. They then have the option of either fitting the exhaust flange or another L section of tube plus the flange. A simple adaption to production to allow the exhaust to be made for either type of F. Rog |
| Roger Parker |
| Hmm, I'm quite excited about the possibilities of using a Post-2001 exhaust on my '96 car. Why? I hear you ask! Because I've been wanting to buy a 4-2-1 exhaust manifold for my car. Unfortunately, the current designs delete the under-engine flexi-pipe which will certainly have long term consequences on component life because of additional strains placed upon the system due to engine movement. If however, I were to fit one of these systems, attach it to a pre- 2001 cat and use a post 2001 exhaust, there is a now a section of exhaust into which a new flexible section can be inserted... :o) Unfortunately, this is going to cost me some money to put together- new manifold, new exhaust and also a custom flexi-pipe, but possibly worth it... :o)) |
| Rob Bell |
| Interesting to add that the new exhaust on the TF uses a different exhaust manifold, still connecting 1 and 4 together for one downpipe and 2 and 3 together for the other, plus the manifold to downpipe flange is secured by six studs and the flange is much bigger. Rog |
| Roger Parker |
This thread was discussed between 14/03/2002 and 24/03/2002
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now