MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - F exhaust layout

Can anyone provide a technical print out for the exhaust system on a 99 MGF 1.8?

I'm looking at buying one at the moment but I'm concerned at a slight blow that you can hear when the revs rise.

I'm used to a standard layout such as manifold, downpipe, front silencer, rear silencer on most cars but getting a proper look at an MGF system is a little more difficult.

If I can get hold of a diagram or such I can figure out which part needs replacing, and hence work my price around it.

Thanks in advance.
phorbiuz

Figure for a new lambda sensor if you have to get a header.

Pipework is thus:
four to one header, mates to engine and downpipe on the front of the engine
Downpipe - two to one, includes flexi section, mates to header on front of the engine and catalyst behind ehaust pipe.
Catalyst, with extra lamda sensor on exit (?? not so sure, my 97 doesn't have this)
Exhaust pipe, takes input from LHS (looking from back of car) and has exit pipes poking out thru bumper.
Will Munns

Rob Bell to the rescue again...........

http://www.mgf.ultimatemg.com/group2/exhaust/exhaust_differences.htm
David Clelland

You may also find this web site useful which includes part numbers for the separate items for the exhaust system

http://www.lame-delegation.de/mgfcar.de/epc/5972.htm

Keith
Keith Williams

.. was lack of VIN's. Now perfect.
Oh yes, it's even less easier than thought.
MGF 1999 should be no problem though.
Dieter

Thanks for the replies people - much appreciated.

D Forber

This thread was discussed between 13/03/2006 and 14/03/2006

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now