Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - Faulty Oil Temp Guage
Hi All, I have just re-assmebled the centre console on my mk1 mgf (after changes to stereo) - now, when turning on the ignition, the oil temp guage flips straight to max (well, beyond max actually). The car and engine is cold, so i know the reading is incorrect - does anyone have any idea what i may have done? - i'm sure i replaced all the connectors properly? thanks! Mike |
M Chase |
Check for short cicuits due to worn wire insulations or a cut wire. The diagram might help. http://www.mgfcar.de/schedules/sb34.jpg |
Dieter K. |
Thanks Dieter, i'll take a look for any possible short circuits. I guess there's no really much that can go wrong with the guage itself?? |
M Chase |
No, not a lot really. Been a while since I last took the oil gauge out of my car, but I seem to recall that the loom plug is handed, so I don't think that it is possible to wire it in the wrong way round... so why there is a problem I don't really know? |
Rob Bell |
Thanks for you comments Rob - they prompted me to checked again and somehow i'd managed to re-attach the 3 pin connector plug 1/4-turn round the wrong way (so all pins were connected, but in the wrong sockets) - i've reconnected properly and all is back to normal again! Thanks again for your help guys. Mike |
M Chase |
That's a relief Mike - glad to hear that all is once again fixed :o) |
Rob Bell |
This thread was discussed between 12/06/2004 and 14/06/2004
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now