Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - Flickering reverse lights
... any clues whats causing this ? Gaz |
Gaz R |
Yep, brake switch In footwell follow wires near bake pedal, switch is on the end. Twist switch and it will come out Pull very hard and the plunger at the top of the switch will pull out about an inch - you will think that you have broken it, don't worry. Press brake pedal and reinsert the switch Release pedal and the switch will reset to the correct length. DONT lift the pedal past the natural return position or you will need to do this again. Will |
Will Munns |
... reverse lights ... not rear brake lights ... |
Gaz R |
It gets worst, not only are they not teaching our children morals in school but they are also failing to teach them to read! Cheers Patrick |
Patrick Beet |
Yep, reverse switch or affiliated wiring harness In Engine Bay at the gearbox (to be reached from below). @Patrick, is this better ;) |
Dieter K. |
Dieter, I enjoy reading your posts. Some of you young chaps are always worth reading. Happy Birthday Patrick |
Patrick Beet |
>Some of you young chaps You always are as young as you feel !! :o) |
Dieter K. |
This thread was discussed on 26/03/2003
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now