Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - Handbrake light
| Quick question, how do you reduce the sensitivity of the handbrake light? It comes on going over bumps etc when the handbrake moves slightly... Cheers, Mike. |
| Mike |
| My brother's car had this- but he got the dealership to sort it out at the first service, so I am not sure of the 'rectification procedure' :o( |
| Rob Bell |
| It could also be that the cable needs adjusting. This is pretty simple to do - you remove the cubby box (just pull it out) and you'll see the handbrake adjuster nut and the 2 cables. There SHOULD be 1-2mm gap at the other end, but I can't describe what the bit looks like down there! Its the mechanism that actually works the h/b. A dealership should be able to adjust it in about 10 minutes! Neil. |
| Neil |
| Mine also does this he handbrake doesnt actually click down when i take it off it just sort of wobbles, is this supposed to happen? Nick BTW sorry for jumping in on the thread :0) |
| Nick Walters |
| Could also be low level in the brake fluid expansion tank. Found this at my old MGF years ago ayfter having useless dismantled half of the tunnel. Both switches, the handbrake and the fluid level are linked to the same light. Can easy be verified by pulling off the connector from the grey coloured cap in the bonnet. If the light doesn't come up any more then fill up with DOT4 and immidiately check the brake pads. Regards Dieter |
| Dieter Koennecke |
| Yep, mine as Nicks! D |
| Davey |
| My fluid is ok as i have had the pads and disks changed all round and new fluid ?? :0( Nick i thought handbrakes were supposed to click down into place? |
| Nick Walters |
| Yeah mine does this as well. The only way around this so far ive found is to pull out the handbrake gater from the housing. This stops the problem but would love to know how to fix it!!!! |
| Chris Glen |
| My 2001 F has just been to the dealer to rectify the problem. It was as if the leather on the gaiter of the handbrake was too tight, and pulling the lever up slightly, just enough to turn on the light. Half an hour to fix it, and it's been fine since. |
| P Harrison |
| mine does it too |
| richb |
This thread was discussed between 05/03/2002 and 06/03/2002
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now