Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - Heated washer jets
Bought the above from Midland MGF, but of course all i got was the tubing and lots of other bits. Having the technical knowledge of a gnat with alzeheimers any help would be appreciated, i can understand where the tubing goes but whats with all the other gizmos? Thanks in advance. |
darce |
Darce, Take a look at Tony's website (Tony, Hants). He has a section on fitting these jets and also has the diagrams. http://members.aol.com/apttony regards Bruce |
Bruce Caldwell |
Thanks Bruce, its very informative. |
darce |
Darce when I bought the kit, it came in a box complete with some very good instructions. If you didn't get these, have aword with your dealer. Chris |
Chris |
Yeah...same here, Chris...full clear instructions. The only difficulty I had was getting the two lots of bare wires into the connectors, but even THAT wasn't that hard, just fiddly!! Got my local MGR dealer to heat-shrink the plastic on the connectors for me (the hair-dryer DIDN'T work!!) |
SimonKE |
That was my point, i bought them from www.midlandmgf.com who are breakers, hence £25 and just the kit, no instructions. They sell all parts and usually cost about half MGR prices. |
darce |
This thread was discussed between 10/11/2002 and 11/11/2002
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now