MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Hoods jams

I'm just about to trade in my '98 1.8 for an ex demonstrator Trophy. Price agreed etc, except... my hood has always had a tendancy to jam when half way down (so does the hood on this Trophy and they say it did it from new!). They want to get both hoods fixed, mine and the Trophy's, but charge me for the repair to my hood.

The problem seems to be (on both cars) that the intermediate hood hoop moves back as the hood is folded down and then causes a jam. If this hoop is pulled forward as the hood is lowered it does not jam.

Anyone got similar problems, what's the fix?

Nic
Nic Kent

This hoop prevents my hood being lowered sometimes but I've never found it a great pain to simply re-position it by hand TBH. I do believe Andy (AKA Scarlet) covered this in an article about hood care in the new MGF FAQ.....

http://www.dotcomoff.demon.co.uk

Also home of the F'ers Gallery and MG Dealer Guide. :)
Paul Lathwell

I agree it's no problem to reposition the hoop by hand, the only problem is that the garage percieves it to be a problem on my car when it becomes their car and they have to sell it!
Nic Kent

Now I see your point Nick. Any chance of trying a more understanding dealer then. TBH, I really don't see them doing anything with it.
Paul Lathwell

I think you'll find it is worse in winter, as the fabric is less supple in the cold weather, and causes the bar to jam. Mine's done it every so often since it was new, as has one of the F owners I work with. I've never considered it a big problem to just manually move the bar. Beats buying a new hood!
Paul
Paul

Hood jamming ½ way down (more commonly known as a 'lock-up') is as you rightly say, caused by the central bar not moving out of the horizontal and getting caught under the front windscreen plate (where the windscreen catches are mounted.)

The design of the F's hood has 2 strips of elastic sandwiched between the seat belt material and the hood fabric which is supposed to pull the central bar rearward and thus out of the horizontal position when the hood is lowered. Elastic, being a fabric type material is susceptable to dampness, temperature and age and thus lock-ups start occurring.

AFAIK, there is no permanent repair as the only 'treatment' is to replace the elastic strips and these are then subject to the same climactic conditions and ageing as the old ones. So, IMO your dealership is trying to rip you off. The only permanant solution is to get into the habbit of nudging the bar upwards as you lower the hood, thus preventing it locking up. This also has the added benefit of helping to prevent the hood material being nipped by the frame.

Lock-ups can be usefull, forcing a lock-up by holding the central bar flat as you lower the hood is an excellent way of gaining access to the rear screen zip over the top of a windstop.

All of this (and a lot more) is covered in my article for the MGF FAQ as 'promoted' above, including photographs showing actions and the relevant components:

>> http://www.dotcomoff.demon.co.uk/ <<

:-)

SF
Scarlet Fever

The hood jamming came up a little while ago and I beleive the person who raised it(PUN) fixed it by adding a little motorcycle chain lube to the hinges. An other option is to get some stronger elastic and sew it (by hand) to the back of the current elastic strips, thus incressing the pulling power. But I would try the lube method first, just be careful not to get it on the hood!

Will
Will Munns

IMHO not worth spending any money on fixing it, as I always managed to solve the problem by hand (once I found out about the reason it got locked up).
Beat Fischer

Hello, I am the dealer in question!! The only reason I found this site is because there are three of us here doing everything in our power to find out how to sort the problem. Please be assured, I am not trying to rip anybody off,nor am I not understanding, it's just that when we have a car on our forecourt and something doesn't work as it should, we can never sell it. Would you buy a nearly new car with a problem? I wouldn't. So we like to make sure when bringing a car in, we know what it's going to cost us to make it saleable. I know it's not a difficulty, doesn't really worry me at all to be honest.(but I'm not the boss!!)
It seems from the people we've spoken to it's just a case of lubricating it, simple as that, though i'm going to get this confirmed. When I know, i'll post the solution on here. Though if it is a design fault and not a great deal can be done to rectify it, we'll lubricate it and do or best to ensure it creates as little problems as possible.

Ryan Conway
Skinners MG Rover
Rye
East Sussex
ryan

Nice to see you taking a real intrest ;-), get to browse the web on company time and they know your doing it!
It may well be worth searching the archives (you will need to register -FREE) as this has definatly come up recently- and motorcycle chain lube was the cure (goes in thin, sets like vasaline)

Will
P.S. Hope you become a regular
Will Munns

Ryan, i too hope you become a regular, its excellent to have dealer feedback, we might learn something from you and vice versa...*s*. Dr Dave from Richardsons of Tiverton provides useful dealer info and feedback on his forum too.

Andy/Scarlet, great photos and description re the hood in the FAQ. I always wondered why the hood jammed! until now I’ve used the 'push it back even harder technique'...*g*, i wont in future. Also interesting the your stuff about hood wear points, particularly the rubber seal you mention. I've messed around with the rubber flap body seal just behind the door for ages, mainly to try to stop wind noises at speed right next to your right ear. Tried sticking it to the body to stop it flopping forward but the lever force from the hood when folding is always great enough the rip it off again. The year 2000 MGF as a little metal bracket which locates this rubber flap better, its very easy to miss if you don't look carefully. However the hole necessary to drill the body to retro-fit the bracket is impossible to drill without dismantling the car. However even this bracket does not force the flap to properly plug the hole its supposed to when the hood is up. The brilliantly the engineered piece of rubber in the same location on a new MR2 shows how this can be done, but then its hood doesn’t have to fold forward too. I ended up having a small length of bike tyre inner tube about 30mm long and 20mm wide jammed in this area both sides to seal the hole at the base of the hood, its quieter and doesn’t fall out when you fold the hood.

Re: obsession with wind noise…*g*, my car has loads of additional sound proofing both on and above the engine cover, in front of the rear bulkhead and in the doors, this coupled with the headlining and the fact that my hood fits properly, (looked at 2 TFs on a dealer forecourt yesterday still with rubbish hood fit at the header rail), makes it very refined at speed, but with the 57i and Trophy throttle body still sounds great when I’m in the mood
Paul

My hood does the same thing - it will only lock on the first time the hood is lowered when it has been up for a while (eg overnight). My dealer has had the car in three times for this and the first two times recommended I use lubricant.

I have pointed out that I have used lubricant and it has made no difference. The third time it was in (this week) they told me they could not replicate the fault. Another emloyee did say that unless the failure was more catastophic the problem would not warrant replacing the roof.

IMHO the roof is faulty and needs fixing. Not happy.

Cue the Carry On Lubricant jokes...

Jeff Newman

Jeff, re Andy/Scarlets comments just have a look at the partially lowered hood and see if you can see the pieces of elastic that are supposed to pull back the centre bar, see if they look ok. Apart from that its only the 'centre bar nudge' maybe. It may just be a MGF feature..you know, 'character'...*g*.
Paul

I may be wrong, but a while back, didn't someone describe how they'd fitted an extra elastic strap between the central and the one behind it? This may not, of course, be acceptable for a dealer trying to sell it.
David Bainbridge

Ryan,

No offence intended by my comments, but as you can imagine people do quite often complain about dealers. From my initial reading Nic's comments I was under the impression that it was one of those lesser dealers trying to pull a fast one, this clearely does not appear to be the case - keep up the good work. ;-)
Paul Lathwell

Ryan,

OK, your finding this site is enough evidence for me that you are genuinely trying to help and not pulling a fast one! Sorry for any offence i may have caused, but, living in Essex, i know of a number of official dealerships who i wouldn't touch with a barge pole!! Welcome to our little world, this is a great site for anything and everything MGF / TF, and input (whether official of not) from someone 'in the inner circle' is very welcome indeed. :-)

Paul,

Glad my little piece for the FAQ was useful, had an IT nightmare from hell trying to cut'n'paste the MS Word wordart into my graphics package - still, i got the hang of it eventually and i was pleased with the results. Unfortunately the hood wear section comes from personal experience, indeed i am now on my third hood, the last one (and this one now as well) wore through due to the poxy bit of rubber seal being trapped during folding. I will be superglueing it to the trim in the very near future to see if that makes a difference - i can't keep buying a new hood every other year... :-G

SF

Scarlet Fever

I had a call from Ryan this afternoon who having read all your contributions accepts that this problem is clearly not uncommon and that therefore will not impact the part exch. of my car. So my thanks to everyone who's contributed to this thread and you'll be pleased to know the deal is struck and I pick up the Trophy on Wednesday.

Nic
Nic Kent

Congratulations and well done to your dealer for being so thorough in trying to cure the problem.
Paul Lathwell

Paul,

If I remember corectly there are two velro straps that are used to pull the centre nudge bar back. I have tried adjusting these to no avail. Will check out SF's FAQ I think...

Cheers

Jeff

R280ODG 1998 VVC
Jeff Newman

Thanks for all your comments. As Nic said, it has helped us come to a satisfactory conclusion. I will become a regular I think, I learnt one heck of a lot from this site yesterday,not just F's but also the Z cars too! I've given the address to my service manager who also thought it was excellent. If anything comes up that I can help with I will be more than happy to give any relevant information from within the 'inner circle' Thaks to you all.

Ryan Conway
Skinners MG Rover
Rye
East Sussex
Ryan

Where can I find the MGF FAQ page?
John
J Kervin

If you look at the top of this thread you will see a list:-

Add your comment New thread Invert List threads List messages Subjects Last posts Help Archive Customise FAQ BBS by email Search

This is where the original FAQ is loctaed.

Ted
Ted Newman

at the entry site of this BBS is also a link to
http://www.mgcc.de/mgf/

Try keyword 'hood' :)
Original old FAQ and as well the new FAQ and all technical pages I know of are covered and indexed in that search engine.

Cheers
Dieter
PS. though, Rob's pages still on some index troubles :(
Dieter Koennecke

J Kervin,

There's also a new MGF/TF FAQ under construction on my website....

http://www.dotcomoff.demon.co.uk

...Which is intended to replace the existing FAQ on this site as and when it's more complete. Incidentally, I've included the old FAQ in the new one kind of until such a time as the info can be moved into the new FAQ properly. I WILL get there one day! =-o
Paul Lathwell


Had this "problem" from day one. Never considered to be a real bother though.A litle nudge in the middle and voila!
I had more serious problems to solve (false oil temp- Dieter saved the day!!;-))

I will try the lube solution for the hood lockup.
Ryan, I wish my Greek dealer was half as concerned as you appear to be!! You have earned my respect.

Cheers from Athens!

Theodossis
Theodossis Kazas

Theodossis, thanks for the comments, they are appreciated, but I can't see why other dealers don't try and help, surely it's just good customer service, how can dealers expect repeat custom if they can't look after their their current customers cars?? Beyond me really, it's not as if it was a real hardship surfing the net on company time!!

Although we are willing to help, as yet myself and the service manager here don't operate an international MGF call out! Maybe a possibility for the future though...as long as all expenses are covered!!!

Many thanks

Ryan Conway
Skinners MG Rover
Rye
East Sussex
England
Ryan

Ryan,

Excuse me for asking, but are there any facilities for information sharing between MGR dealers for situations such as this. As I mestioned earlier, the dealer I went to (I won't advertise!) will not fix the problem as they do not see it as a catastrophic failure. If you do manage to resolve this issue (and I hope you do) how would other dealers find out ?

Also - well done for having a look and adding your comments to the site.

Cheers

Jeff

1998VVC R380ODG
Jeff Newman

Jeff.
Sorry for not replying sooner, internet not working as it should!

I'm not aware of any information sharing procedures, we just dig about ourselves to find solutions, on certain faults MGR do ask for feedback, as to what they do with it I think they use it when redeveloping or updating existing models, sometimes sending out bulletins as to how to remedy faults on current models.

We tried the suggested motorcycle grease on the hood and it worked brillianty,dropped first time every time in fact WD40 seemed to do just as well when applied to the joint in question.

Dealers will just have to find out by doing a bit of work themselves i'm afraid!

Thanks for the comments.

Ryan Conway

Skinners MGR
Rye
East Sussex
Ryan

I have fixed the problem by affixing a loop of elastic, secured by Velcro (and adjustable) between hood bars 2 and 3 near the passenger cantrail (far left of hood). This gives just enough extra purchase to the existing elastic in the hood to get the bars to fold together properly.
Takes about 10 minutes to make it, and less to fit. It can be removed or retightened at any stage.
By far the easiest fix for this problem.
Grant Vowles

There is a plus point to the roof sticking. It removes the urge to just fling the roof back from the drivers seat, which I have found out to my own cost, can easily bugger up the rear window.

Tim
tim

Tim, If you open the zip (can be done from driving position- whilst strapped in) before flinging the hood back then the plastic doesn't buckle- thus you can flick off the hood whilst waiting at the lights or stuck in traffic.

Will
Will Munns

Will

What year is your *F*?

I hardly ever use the zip on my '96 *F* as it is extremely fiddly. You need to kneel on the the seat, hold the flying part of the zip with your right hand then pull the zip with your left hand to the halfway point, then undo the velcro fastener and continue with the zip!

I tell you I would not like to try that whilst sitting in the driving position AND I would deserve to receive a life time ban if I even attempted it whilst on the move.

Ted
Ted Newman

Ted, If you only do up the zip to the point where it is level with the drivers side velcro then it's very easy, also unsticking the centre velcro before you start speeds things up somewhat!
Doing the Zip back up is a diffrent matter though.
You can do it whilst travalling slowly or stopped, but I wouldn't recommend it over 30 or in built up areas - best done whilst waiting at the lights/traffic calming island.

Will
P82 KTP
Will Munns

Will

Cant you design a small computerised machine to fit to the zip:-)

Ted
Ted Newman

Ted,
If were talking mechanics then the screen buckleing problem could be fixed by putting more tension pulling sideways at the centre of the screen, this would ensure that no slack was available to buckle.

AR*E, another project!

Will
Will Munns

Is there an air con unit available to buy please if so where cheers!
nigel

Will

I'm with Ted on this one, that zip is a bit of a b*stard. Easier and quicker to just get out of the car...

Tim
tim

Tim/Ted
I bet you never put the hood up whilst still strapped in either!!

Will
Will Munns

Will

No problems putting roof up - just lean back, grab and pull forward - slam clips on all done in five seconds flat EVEN strapped in. A couple of second longer if windstop is up.

Ted
Ted Newman

Will, regarding your comment

"If were talking mechanics then the screen buckleing problem could be fixed by putting more tension pulling sideways at the centre of the screen, this would ensure that no slack was available to buckle".

I believe Mike Satur was looking at something to do just this. However when i spoke to him last month about it he had not progressed. I think he was going to use 2 pieces of elastic somehow, might look at this myself.



Paul

Will

That's where you are wrong. Seated roof closure perfected early on in my F ownership, only thing is I can't seem to do it when going doing any more that 30MPH :-)
tim

This thread was discussed between 13/03/2002 and 25/03/2002

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now