Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - Mk2 T-Bar in a Mk1 ??
| Can I fit a Mk2 T bar and associated speakers straight in to a Mk1? Has anyone sucessfully done this ? |
| M Turner |
| Yes and yes. John in Surrey has done exactly this: it's a straight swap. |
| Rob Bell |
| What about the Mk 2 door cards with the inset tweeters then ?? |
| M Turner |
| Yup - shouldn't be too much of a problem- been thinking of doing this myself. In fact, to my knowledge, the whole MY2000 interior can be transferred to the early 'Mk1' MGF without trouble. The only 'fiddly' bit is repositioning the heater controls when installing the MY2000 centre console. |
| Rob Bell |
| Thanks Rob, Are you aware of any details regarding the fitting of mk2 interior bits in a mk1 or is it really a simple swaping job ? |
| M. Turner |
| or even a simple swapping job !! |
| M Turner |
| It's all a straight swap :o) A bracket to relocate the heater controls can be purchased from Mike Satur. I don't believe it really gets more complicated than that really. |
| Rob Bell |
| Thought I'd update this thread as I got the following e-mail from Jason yesterday :- 'Saw your input on bbs i am trying to do the same as you but not sure how speakers are supposed to fit in T-bar i guess you have now fitted yours can you tell me how and what type and size speakers you have fitted?' For anyone who's interested the answer is as follows :- I bought two parts (from Midland MGF, Halesowen). One was the mk2 T bar cover (£50) which is identical to the previous one with the exception that moulded into it are two speaker grilles. The second part was the speakers (another £50). What you actually get is a metal bar to replace the one that is currently under your T bar cover. this has two fairly solid plastic boxes riveted to it and in each of these is mounted an oval speaker. the wiring from both speakers is routed to the middle of the assembly so it's a fairly easy job to run the speaker cable from this down the side of the transmission tunnel to the back of your stereo. The whole thing is relatively easy to fit - to attach the replacement metal bar you undo the original four 8mm(i think) bolts and just slot the new bar in and do the bolts up. Removing and replacing the T bar is well documented in the BBS archives and is relatively easy. I've kept the standard MGR speakers in the T-bar at the moment but would be interested to know what other speakers would slot in to the existing housing and if it makes much difference. |
| M Turner |
| Mark, Thanks for info. So for £100, can get everything i need to fit rear speakers. Don't happen to have part numbers? |
| paul weatherill |
| Paul, Yes, basically £100 and a couple of feet of speaker cable to complete the job. No part numbers ast hey were second hand. I bought mine from Midland MGF who are MGF car breakers. If you ring them or e-mail them the guy will know what you are talking about and give you a price. I believe that other contributors to the BBS have also dealt with Midland MGF and had no problems. The website is : www.midlandmgf.co.uk I think. Hope this helps, Mark (proud owner of a stereo with 4 speakers!!!!) |
| M Turner |
This thread was discussed between 08/03/2002 and 14/03/2002
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now