MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Noyz 'n the hood

Just saw the 'hood jams' thread and it reminded me to ask about a minor niggle with my hood (2001 VVC).

When I drive along a bumpy road, there are quiet 'clicking' noises behind my head as the car jiggles about. I cannot for the life of me find any rattly bit of the hood mechanism, and to be honest it doesn't sound like a metal joint rattling - it's more like two bits of plastic rubbing together. The hood mechanism certainly works fine apart from the very occasional 'lock up' (as SF now tells us it's called). I just can't locate the cause!

Oh, and the noise goes away with the hood down, and I haven't yet tried to find out what happens with the hood up but window unzipped. I'll do that tonight on my way home.

Any ideas?

Oh, and do I get banned from this BBS for that thread title?
David Bainbridge

I get a bit of a rattle caused by the end of the rear screen zip flapping around and knocking things.
but mines 96 i am not sure what the 2001 hoods are like..
Nick Walters

>>When I drive along a bumpy road, there are quiet 'clicking' noises behind my head as the car jiggles about. <<
It could just be the bodyshell flexing - and 'stressing' the roof. This is the case in my '97 where the flexing can be bad enough to pop the hardtop out of position. The bodyshell floorpan appears to 'hinge' just to the front of the seats - and you can see this in the soft-top when the fabric behind the windscreen will momentarily crease.

Steve
Steve

Could also be where the T-bar meets the door - the nasty plastic fixings for the t-bar are v prone to come loose. If it goes away with hood down it could be the hinge of the hood mechanism pushing against the plastic: also if the engine cover carpet isn't properly fitted around the hinge it could be pusing against the t-bar.

E
Ed Clarke

Nick, If you look the zip end has a velcro pad on it and there is another pad on the hood at the end of the rear screen.
Stick together and there you go.
Tim
H10 VVC
Tim Sanders

Zip - yes I thought that at first but it's not - velcro to the rescue!

Steve's flexing idea. Yes - I'm sure this is the basic cause - I can almost predict when the noise is going to occur: when the weight of the car is thrown onto diagonally opposite wheels. Now I'm just hoping I can track down the actual site at which it occurs.

Ed' ideas are exactly the sorts of things I'd wondered about, but the noises didn't go away after the repairs on my car (when the rear of the hood would have been unclipped, the engine cover taken off, and the T-bar removed). This is still the direction I'm thinking of, but perhaps I'll have to try a systematic listen while someone else is driving.
David Bainbridge

This thread was discussed on 14/03/2002

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now