MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Re-rated fuel pressure regulars

As mentioned on the other thread on fuel regulators started by Will, I had an email from Mat whilst I was away on the Treffen regarding the re-rated standard fuel pressure regulars I asked him to prepare. He's now had a batch re-rated to 3.2-3.3 bar - which are now ready :o) cool!

His email as below:
>>
Pressure Regulators will be ready for dispatch on Monday. Calibrated to 3.3 bar (standard +10%) price is £45 including P+P.

Mat

E: mathew@msre.co.uk
<<

I have Matt's contact details for anyone how is interested - I'll be dropping Matt a line for mine later today! :o)
Rob Bell

Just checked with Mat - best contact him directly for these :o)

Regarding fitting - apparently the existing regulator is a bugger to remove, but the new one a doddle to fit...
Rob Bell

I take it this wont have any effect on HP or Torque but simply better throttle response?
Bob Millar

That's basically it Bob :o)
Rob Bell

Certainly a good deal cheaper than an FSE. Hmmm decisions decisions!
Bob Millar

>Hmmm decisions decisions!

The early bird... :)

Just sent an email to Mat.

Regards
Dieter
Dieter K.

... got the answer, shipped cash by wire transfer.

Looking foreward to the postman :)))

Rob, thank you for the support !!

Cheers
Dieter
Dieter K.

No problem Dieter :o) Hopefully will be getting mine soon too :o)
Rob Bell

Gents,

could anybody PLS explain the theory behind the 3.3 bar fuel pressure regulators ?

Do you expect better throttle response by running richer during accel and lambda open loop ?

A plus of 10% is quite a lot. It should give you approx. 3% more fuel mass which could have also a negative effect on peak torque and power (depending on the original cal)

Kind regards

Michael


Meikell

@ Michael, this is optimum for VVC.
I don't think it will do much on an MPI.

Lots of stuff in the achives and on the german site of Nikolaij Klingemann.

However, much cheaper then the adjustable PBV ;) ..... and it doesn't hurt (but the account).

I'll report for sure to the MGF Technik Forum !

@ Mat, got the email, but have some problems with answering (damn Microsoft crap).
......
Reference is
18.09.2003 BTX AUSLAND REFERENZ 180903/05115/70327 MAT... ....
-129,27 EUR
.....

Cheers
Dieter
Dieter K.

This thread was discussed between 15/09/2003 and 24/09/2003

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now