MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Roll Hoop fitting kit?

Hi all, have bought from ebay and fitted some roll hoops very heavy and sturdy they are too (part number XPT 000108 MWK) but to tidy the job up a little I am looking for the trim kit (part number XPT 000136 ACA) which I believe has a template for cutting holes in T piece and rubber ring fittings ect?

If anyone can help with this item or tell me where to buy it from? please let me know.

Thanks Bob
R J Baker

It is the stencil/template for drilling and cutting the plastic T-Bar trim piece that I need or anyone with these hoops fitted near Warrington, Cheshire who would let me measure theirs would help.

Thanks Bob
R J Baker

Hi Bob,

Look here for your trim kit

xpart
http://mgroveraccessories.com/shop/150_445_0/mg/mgf/styling/roll_hoops_trim_kit/index.html?

Sue

Sue Wilson

Thanks Sue, have tried these folks but they have no uk stock but may be able to back order one from Spain or Italy but may take a month.

Bob
R J Baker

Not sure if this will help Bob...

http://images.swks.co.uk/ebay/instructions/MGFINSTRUCTIONS2.pdf

Sam Murray

Thanks Sam, have seen these before but unfortunatly they dont apply to the roll hoops I have as on mine the hoops do not seperate from the cross bar they are welded in place. have now fitted the hoops and just bodged the trim a little but it is re-fitted, i will tidy the job up soon and then post some photos.

bob
R J Baker

This thread was discussed between 11/02/2011 and 20/02/2011

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now