Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - rollhoops & windbreak fitting instructions needed!
Hiya, Just managed to source Boxer MK1 Chrome Rollhoops & Windbreak at a very nice price, but wondered if anyone has any fitting instructions they can tell me :-). I assume i need to drill 4 large holes on the plastic interior behind the seats and the rollhoops go through this and screw into holes already made on the subframe underneath? I have no screws for it, so what size/what length are required. Many thanks :-) |
JANINE ELLIOT |
Hi, I think the easiest would be to asking Mr Satur himself. Phone: 01709 890555 http://www.mikesatur.com/acatalog/Rollhoops_Windbreak.html HTH Dieter |
Dieter |
http://www.mgf.ultimatemg.com/group2/DIY/hoops/index.htm this URL has fitting instructions :o) |
P Thomas |
Take care, X-Power hoops @ Rob's site is different from Boxer MK1 hoops. |
Dieter |
Yea, thanks both of you. Spoke to MS office today who sent me an instruction document for installing the Boxer MK1. Seems I need to source a mounting beam to install them. Am hoping they can find me one to buy, if not I'll need to build something.....Nevermind, and it would look so lovely in the car this summer.... |
JANINE ELLIOT |
Hi all, I am also in "the market" for a set of hoops & windbreak. I am open to advice as to which to purchase, limited oppoortunities for research here in USA!. I will be totally honest I am in the market for looks and ease of fitting. As ever your advice as to which to go for would be most appreciated. Thanks in advance Elona |
E J Davies |
This thread was discussed between 16/04/2011 and 19/04/2011
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now