MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - TF cooling system & HG

Does anybody know if the TF has any changes to the cooling system and head gasket arrangements compared to the F.
Stephen Laithwaite

The current thinking is that there have been no changes since the steel dowels mod, but this has been tried and tested for over a year on 'F's - understanding is the reporting of HGF's have fallen off rapidly in this time frame.
But further modifications may have happened, I don't think that MGR would be shouting from the rooftops that there has been an issue all along with 'F's.

Will
Will Munns

Didn't someone mention that the mild steel rad fitted to the F had been changed to an aluminium item on the TF?
Rob Bell

They engine bay runs a lot cooler now (30% i think) as a result of the redisigned side air intakes.
Spyros Papageorghiou

'Larger alloy radiator' as quoted in the original released tech information, together with 'a reduction of 20% in the engine bay temps'. I specifically asked for the qualification of that latter info when in Portugal, and the answer is 14 degrees C as measured from on top of the alternator.

There is also mention of a positive movement of air through the engine bay when the car is moving as created by some of the aerodynamic changes to the body shape. Now I do not have any specific on what does what here, but I do suspect that the reshaped boot lid alters the air pressure on the top of the boot and probaly sees a reduced pressure area above the vents in the lid. This 'draws' air from the engine bay which is probably more than the F sees.

The side vent shape change may also have an influence on the air flow through them, but these wouldn't be of much use to cool the engine bay as there are too many routes for this air to escape before passing through the engine bay. The 'draw' created by the boot lid then provides the draw to which the modified side vents performance can then exploited and we see a marked difference in airflow through the engine bay.

Now this engine bay airflow is my interpretation of the system and is not based on any specific conversations I have had with Peter Stevens and co. (must remember to ask him when I next have the chance!) It does however appear to be a logical situation bearing in mind that under car airflow is being reduced through the lower frontal stance. It also raises a further question as to whether the simple change of a bot lid would add to the positive airflow through the engine bay and help reduce F engine bay temps. I do not have an answer to this.

Rog
Roger Parker

>>>>>>.but I do suspect that the reshaped boot lid alters the air pressure on the top of the boot and probaly sees a reduced pressure area above the vents in the lid. This 'draws' air from the engine bay which is probably more than the F sees.

If this is so it gets me thinking what happens to the cooling of the car when a boot spoiler is installed?…(also a boot rack with/without a load too).
Ian Holliday

Spooky !

Just this weekend I had the stupidity to drive about 40 miles with the engine bay cover of. I did this as I was in a hurry to meet the 12 o'clock closing of the parts dept.

Anyway apart from being slightly deaf I can tell you that that engine must be absolutley roasted in its bay. So I think for those of you much more technical guys out there it would be worth investigating how to reduce the bay temp.
S Laithwaite

This thread was discussed between 15/03/2002 and 18/03/2002

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now