MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Wheel PCD

Could someone please confirm (or otherwise) that the PCD of the wheel bolts is 95.25mm I have read conflicting values and as I am about to fit some better stoppers I need to know for when I drill out the discs.

Regards........David
d mottram


PCD is 95.25mm

Offset is 30 -35 mm
Centre Bore 56.6 mm

Chris Catchpole

Thanks Chris
david mottram

The Empire lives on. Just realised that 95.25 mm is 3 3/4 inches.............the old Triumph wheel PCD !
d mottram

Doesn't surprise me, MGF uses Metro hubs (hence the PCD), it stands to reason that when they developed the Metro they would use off-the-shelf componentry if possible and save developments costs.

Another example of this is the original MGF radiator, which has an imperial thread bleed screw...

SF
Scarlet Fever

Spot on David - there are a good number of Triumphs running around in the UK on surplus to requirement MGF wheels ;o)
Rob Bell

This thread was discussed between 29/11/2003 and 01/12/2003

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now