MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - window bracket part number please

Just taken the drivers door to bits to fix a broken window stop and found it to be intact. The part that is broken is the plastic brackets that are attached to the window itself and bolted to the window runner. Anybody know the part number for these as can't find them listed.
thanks
mitch
Iain Mitchell

Not sure which part you are describing but try the following web page. Dieter's pages to the rescue again I think.

http://www.lame-delegation.de/mgfcar.de/epc/6579.htm



Keith
Keith Williams

Thanks Keith but I had already visited that page as my first port of call. The part I am refering to is the parts on the web page which are still attached to the glass and not identified by part number hence my problem.
thanks
mitch
Iain Mitchell

Iain,
I have got exactly the same problem with my passanger window, is it the 2 plastic holders that keep the window in the bottom bar? I cannot find an individual part number for these, if you get anywhere please let me know. I've done the usual things repleced the plastic stop for the hex bolt, messed around with the adjuster, wasted an afternoon taking the whole thing apart and putting it back in, sworn pointlessly etc etc. Cheers Terry
Terry

Thats them Terry. Will keep you informed if I have any joy. My brain has already kicked into how to make my own version of these.
regards
Mitch
Iain Mitchell

9 CUQ100140 - Stopper-door glass
WD037078 2,08
10 CVT100090 - Washer-glass lift stop assembly
WD037078 0,69
11 SS105161 - Screw-hexagon socket - M5 x 16 -- glass stop to door glass

Making an own is easy, but getting the standard is much easier.
versions since 1995 (left 2 right)
http://www.mgfcar.de/window/dkdcp_1929.jpg
newest installed
http://www.mgfcar.de/window/dkdcp_3680.jpg
Dieter

Thanks Dieter but it is not the window stop, it is the brackets that are glued onto the glass itself then bolted to the runner, just the same as Terry
rightly identified above. They are on your web page as I said but not identified.
thanks
Mitch
Iain mitchell

Ahhh, apology.
They are not available as spare.

These where from a wreck. Difficult to clean from glass chips, btw.
http://www.mgfcar.de/window/dkcp_3967.jpg
http://www.mgfcar.de/window/dk1cp_3968.jpg
more on the bottom of this document
http://www.mgfcar.de/window/window_lift.htm

I think it's easier to source a complete door glass with the brackets.
Take care you get one from a car _after_ 1998 cause the glass shape changed in 1997.
Dieter

Thanks Dieter , you confirmed what I expected.
Okay plan 'b' --- make one !! aluminium or plastic ??
or see what lurks inside the doors of a Rover 45
regards
Mitch
Iain Mitchell

This thread was discussed on 11/01/2007

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now