Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - Window stop
Can anyone give me a link to an article on how to replace/adjust the window stops on my T reg VVC? Thanks in advance Tillman http://www.tkimages.co.uk |
Tillman Kleinhans |
Tillman, see Paul's site at http://www.dotcomoff.co.uk/ Look in DIY/Bodywork section. |
Neil Courtney |
Drivers side window. When the window comes up and reaches the mechanical stop (fully up), what turns off the winder motor? My window seems to want to continue on up putting loads of pressure on the stop ...almost to the point of trying to bend it out of the way. Passenger side window seems a lot calmer about the process. MGF 2000X |
Richard Lane |
Sounds Like the window stop is broken, a search of the archives will point to the various sites that detail how to fix it (i,e, Dieters site) Mike |
Mike (Mersea Office) |
<When the window comes up and reaches the mechanical stop (fully up) what turns off the winder motor?> Good question Richard. Can someone explain please. Chris |
C F Jones |
Any ideas ... Just put this in to get to the top of the list again. Would be gratful for a solution. Regards Richard |
Richard Lane |
Richard , try http://translate.google.com/translate?u=http://www.mgfcar.de/index.htm&langpair=deen&hl=de&prev=/language_tools or visit www.mgfcar.de and look at the window section in the menu. Mike |
Mike (Mersea Office) |
Nothing actually stops the winder motor from running except that it stalls when the mechanism hits the window stop. Crude and cheap I know but it works so long as the window stop withstands the pressure. There are no limit switches. Bruce |
Bruce Caldwell |
This thread was discussed between 21/10/2004 and 25/10/2004
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now