Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Clutch linkage bar on sump
| On the driver's side when removing the sump I removed the clutch linkage, which leaves a rod which is bolted into the sump (with a cotter pin to hold the bolt). There is an identical one on the other side, which I presume was for RHD models. Any reason not to switch these rods? The one on the other side has no wear, my existing one is quite worn. Thanks! |
| Geoffrey M Baker |
| looks a good idea. |
| mog |
| That's what I did too Geoff and I was gratefull to those days MG folks for their providing a spare one for futural use, Huib |
| Huib Bruijstens |
| I did the same thing, swapped it around as mine was worn out |
| T Maine |
| Isn't great to have a car that comes complete with spares! ...CR |
| C.R. Tyrell |
| I did it too. It's easy to do! Klaus |
| Klaus Harthof |
This thread was discussed between 28/03/2015 and 29/03/2015
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now