MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Front lip seal

Anyone who has a picture or a drawing of a tool for making a seat for a front lip seal?
YS Strom

Check Archives for 'front seal tool' looking for all of the words. There are three tools that are shown. Bud
Bud Krueger

Thanks Bud

Will make one like this.

http://www2.mg-cars.org.uk/cgi-bin/or17?runprog=mgbbs&access=&mode=imgdis&ifile=28_2014012802364519009_51628662404047_1391173722.jpg
YS Strom

I tried to open this site and got the following message:

Your connection is not secure

The owner of www2.mg-cars.org.uk has configured their website improperly. To protect your information from being stolen, Firefox has not connected to this website.

Learn more…

Report errors like this to help Mozilla identify and block malicious sites.

Cheers
Peter TD 5801
P Hehir

Try http://www2.mg-cars.org.uk/cgi-bin/or17?runprog=mgbbs&access=&mode=archiveth&subject=8&subjectar=8&thread=2010060313452714422

http://www2.mg-cars.org.uk/cgi-bin/or17?runprog=mgbbs&access=51628662404047&mode=archiveth&subject=8&subjectar=8&thread=2014012802364519009

or,
http://www2.mg-cars.org.uk/cgi-bin/or17?runprog=mgbbs&access=51628662404047&mode=archiveth&subject=8&subjectar=8&thread=2017111414073229018

and, this from Mort
http://www2.mg-cars.org.uk/cgi-bin/or17?runprog=mgbbs&access=51628662404047&mode=archiveth&subject=8&subjectar=8&thread=2017012518453930980
for threads with images of cutters.

Bud
Bud Krueger

Shouldn´t the lip point forward'? As I see it, it is fitted the other way round and is also with dia. of 38 mm. whereas the pulley is 38 mm. Is that advisable?


https://www.carandclassic.co.uk/list/32/td/
YS Strom

Everything came out wrong in my comment above.

But is it advisable to use a 36 mm. seal with a 38 mm. pulley, as described in the link and shouldn't the lip point forward?


http://www2.mg-cars.org.uk/cgi-bin/or17?runprog=mgbbs&access=&mode=archiveth&subject=8&subjectar=8&thread=2017012518453930980
YS Strom

And wrong again. The pulley is also 36.
YS Strom

This thread was discussed between 24/02/2018 and 25/02/2018

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now