Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Gauge case/gauge wanted
I'm looking for the outer shell of a standard 2 1/16 gauge, any type, any condition. It's part of my project to build a working fuel meter. Don't need original, don't need Jaeger - just if anybody has a 2 1/16 case (and possibly bezel and glass) lying around from any project and wants to donate it... let me know! Thanks! Or if you know where I can find such a thing, didn't find much on ebay... lots of meters, no shells or cases... |
Geoffrey M Baker |
Hmmmm
![]() |
MG LaVerne |
The combo gauge on the left you could have for the cost of shipping however I ground the tabs off the bezel. If you would rather have a fuel gauge. I would sell you one of these along with a voltage stabilizer you would need ( as used on MGB's... they take the 12 volts down to the 10 needed) for 20 bucks plus shipping.
![]() |
MG LaVerne |
Any one would do fine LaVerne; so sure, send the combo unit. I don't need a voltage stabilizer. I'll use a standard 0-5v panel meter which will be powered by a controller that outputs 0-5v, and that controller would be powered by the car's 12v DC (it will take anything from 6-40v) so I don't think there will be any issues at all as far as the power is concerned. I just have to find a way to mount the panel meter, and if I have a case for an auto gauge I can fit it in that and then mount with a standard underdash gauge mount. I'll make up a Jaeger face for style's sake :) Just ship it on out with a note as to cost of shipping and I'll send you a check. Geoff Baker 3150 E Pima St Tucson AZ 85716 Thanks! |
Geoffrey M Baker |
I'll try and get it out Monday Geoff |
MG LaVerne |
LaVerne do me a favor, don't mail it till Jan 1... I'm leaving here on Monday will get back the 30th... thanks |
Geoffrey M Baker |
Will do.. |
MG LaVerne |
OK, I'm back in sunny Tucson - with a cold :( You can mail out that gauge at your convenience LaVerne! |
Geoffrey M Baker |
Well you could have caught it from me but I haven't sent it yet. Probably on Monday. Maybe I'll be over my cold by then too. |
MG LaVerne |
Mailed it out today Geoff |
MG LaVerne |
Thanks Laverne! :) |
Geoffrey M Baker |
Thanks Laverne, the gauge arrived. I owe you $3.74 :) Do you take paypal? Send me your paypal address and I'll send the funds immediately. Or else I'll mail you a check, in which case I need your address. |
Geoffrey M Baker |
No pay pal...you can buy me a beer sometime. |
MG LaVerne |
Or email me your address and I'll send you a bit of paper claiming to be worth $3.74. Or if you prefer, I can attach three dollar bills and tape the loose change to cardboard :) If you ever get down to Tucson or I get up to Colorado, I'll buy you several beers! I grew up in Boulder but as my family moved from there years ago I haven't been back in more than a decade... |
Geoffrey M Baker |
I'm sending you a snailmail check for $4. Dont' spend it all at once! Thanks again! I'll be working on the fuel meter project in the next few weeks. May take some time to get it all to work... |
Geoffrey M Baker |
This thread was discussed between 18/12/2015 and 10/01/2016
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now