MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Hood/Bonnet gap

I was wondering what is an acceptable gap at the lower edge of the Bonnet (Hood in USA). I have about 1 1/4 "
gap at the lower edge near to the firewall. What should I aim for as a reasonable fit please ?
Mel Pascoe

Mel, Which car, TD TF? PJ
PJ Jennings

Sorry missed that out
Its an MG TD
Mel Pascoe

Mel, Here's an example that shows hardly any gap at all. Probably have to zoom it in. PJ


PJ Jennings

Mel, if you haven't seen this it might be helpful.

http://www.mg-cars.org.uk/mgtd/mgtd_bonnet.htm

Tim
TD26711
Tim Burchfield

I think that 1/4" is top end of the range that is just about acceptable, but 1/8" would be better.
Dave H
Dave Hill

Thanks for the info
I seem to have a reasonable front/rear gap - the link about bonnet adjustment will still be useful

I think I will have to re-drill the wing mounting bolt holes to get the wing higher to meet the bonnet bottom edge better !
Mel Pascoe

There should be no reason to modify holes unless the parts are not original to the car because of damage. Pics of your issues would be helpful
W A Chasser

This thread was discussed on 15/11/2017

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now